LFD Book Forum  

Go Back   LFD Book Forum > Course Discussions > Online LFD course > Homework 7

Reply
 
Thread Tools Display Modes
  #1  
Old 07-08-2013, 03:19 AM
jjepsuomi jjepsuomi is offline
Junior Member
 
Join Date: Mar 2013
Posts: 9
Post 2 preliminary technicalities on the SVM

I watched the lecture on support vector machines and most of the lecture I did understand but the part with 2 preliminary technicalities got me totally confused, I didn't really get them. Could someone perhaps explain them to me in simple terms? I have included the part in the lecture where I get confused (lasts about 5 mins):



I have watched that part so many times, but I'm still not getting the two points.

"There has to be a built in it scale-invariance"?

"We'll be dividing by something that takes out the factor that does not affect which plane I'm talking about"?

Thank you for any help
Reply With Quote
  #2  
Old 07-08-2013, 09:10 AM
yaser's Avatar
yaser yaser is offline
Caltech
 
Join Date: Aug 2009
Location: Pasadena, California, USA
Posts: 1,477
Default Re: 2 preliminary technicalities on the SVM

Quote:
Originally Posted by jjepsuomi View Post
I watched the lecture on support vector machines and most of the lecture I did understand but the part with 2 preliminary technicalities got me totally confused, I didn't really get them. Could someone perhaps explain them to me in simple terms?
I can understand your confusion, as the advantage of these 2 steps is not evident until you go through the rest of the derivation, so they seem somewhat arbitrary when they are presented at the beginning. I'll focus here on the fact that they are "allowed" rather than "useful" since the correctness of the derivation only necessitates that these steps are allowed.

Think of the line defined by the equation 4x_1+2x_2+2x_0=0 (where x_0=1 by definition). This line is the same as 2x_1+x_2+x_0=0 since the points that satisfy the first equation are identical to those that satisfy the second, right? You can scale all three parameters in that equation up or down without changing the line that the equation is representing. Therefore, if I require that you scale these coefficients in a particular way, I am allowed to do that. Don't worry about the wisdom of such step, just its correctness. The wisdom appears later on.

By the same token, if I decide to eliminate the notion of x_0 and replace it by its value which is the constant 1, and now I call its coefficient in the above equation b rather than w_0, I have not changed anything in the essence of the problem that I am solving, so I am allowed to do it.
__________________
Where everyone thinks alike, no one thinks very much
Reply With Quote
  #3  
Old 07-08-2013, 10:22 PM
jjepsuomi jjepsuomi is offline
Junior Member
 
Join Date: Mar 2013
Posts: 9
Default Re: 2 preliminary technicalities on the SVM

Thank you for your reply Professor Mostafa

Much appreciated!

That helped
Reply With Quote
Reply

Tags
lecture 14, support vector machines

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 05:52 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The contents of this forum are to be used ONLY by readers of the Learning From Data book by Yaser S. Abu-Mostafa, Malik Magdon-Ismail, and Hsuan-Tien Lin, and participants in the Learning From Data MOOC by Yaser S. Abu-Mostafa. No part of these contents is to be communicated or made accessible to ANY other person or entity.