View Single Post
  #1  
Old 12-09-2017, 11:05 AM
don slowik don slowik is offline
Member
 
Join Date: Nov 2017
Posts: 11
Default Problem 1.5 Adaline

I had bad luck with the ALA: for all but the smallest training data sets and with more than 2 dimensions, the weights would go scooting off to infinity.

I modified the algorithm so as to become a regression vs categorization problem, I changed the update criteria to be:
Code:
s = np.dot(x[i,:], w)
if np.abs(y[i] - s) > 0.01:                    
   w = w + eta * (y[i] - s) * x[i,:] 
   n_updates += 1
This worked very well, with eta set to 0.1, for training sets of size N=1000 in d=10 dimensions required only 2.7 +/-1.1 iterations through the data to achieve the tolerance of 0.1 on every training data point. PLA on the same training data required about 750 iterations.

So rather than choosing a plane that separates the data, this chooses the plan that gets the correct distance (within the 0.01) between the plan and the data point for every training data point.
Reply With Quote